GAS a 2705/gazelle

ГАЗ-2705, ГАЗ-2705 "Kombi"
Introduction
+ 1. Car nameplate data
2. Specifications and characteristics of cars
3. Controls and devices
+ 4. The engine
+ 5. Transmission
+ 6. A running gear
- 7. A steering
   Possible malfunctions of a steering and ways of their elimination
   Steering maintenance service
   - Steering adjustment
      Adjustment of a steering column on height and an angle of slope
      Adjustment of bearings of the screw of the steering mechanism
      Adjustment of gearing of pair a nut-sector of the steering mechanism
      Adjustment of the mechanism of fixing of a steering column
   + Steering repair
+ 8. Brake system
+ 9. An electric equipment
+ 10. A car body
+ 11. Car maintenance service
+ Appendices



efabfad0

"Gazelle" Gas-2705>> Steering>> Steering adjustment>> Adjustment of the mechanism of fixing of a steering column
In need of adjustment of the mechanism of fixing of a column it is necessary:
Fig. 7.1. The Steering: 1 — a steering wheel; 2, 25 — подрулевой the switch; 3 — a lock ring; 4 — a washer; 5 — the bearing; 6 — the plastic plug of the bearing; 7 — the switch (lock) of ignition; 8 — the bottom casing; 9 — a shaft of a steering column; 10 — карданный the hinge; 11 — a wedge; 12 — a nut: 13 — карданный a steering shaft; 14 — a sealant карданного a shaft; 15 — the bearing карданного the hinge; 16 — bearing needles; 17 — a lock ring; 18 — the steering mechanism; 19 — a shaft сошки with gear sector; 20 — a press butterdish карданного the hinge; 21 — a pipe of a steering column; a 22-arm; 23 — the handle of the mechanism of fixing of a steering column; 24 — the top casing; 26 — a nut of fastening of a steering wheel; 27 — a steering wheel overlay; 28 — the screw of a ball nut; 29 — the top cover; 30 — an adjusting lining; 31, 39 — sealing rings; 32 — a ball of a ball nut, 33 — a ball nut; 34 — a nut; 35 — сошка; 36 — a cover; 37 — поролоновое a ring; 38 — a lock ring; 40 — the shaft bearing сошки; 41 — a shaft-sector; 42 — the bearing of the screw of a ball nut; 43 — an arm; 44 — картер; 45 — a stopper of a jellied aperture; 46 — an epiploon; 47 — a protective cover; 48 — a wedge


- To remove the bottom casing 8 (fig. 7.1 see), having turned away two screws and having released it from the bottom clamp;
- To remove the top casing 24, having approached a column as much as possible to the driver;
- Having weakened a counternut to tighten a bolt the moment 9,0—12,5 Н·м (0,9—1,25 кгс·м);
- To fix a counternut the moment 14—18 Н·м (1,4—1,8 кгс·м), having excluded отворачивание a bolt;
- To check up column fixing;
- To establish the top and bottom casings.